1500 High Pressure Drill Compressor

The Sullair high pressure two stage rotary screw drill compressor delivers a capacity and pressure of 1500 cfm at 350 psig / 500 Psig or 42.5 m3/min at 24 bar / 35 bar.

The Drill air-end is designed with a inlet control system and drive adapter to match up with drive choices. Multiple gear ratio’s with matched internal volume ratio’s dials in specific capacities and pressure for optimum performance.

POPULAR USAGE
Drilling.

MAIN BENEFIT
Bare shafted drill air end, 2 year warranty, Inlet filter, Fluid thermal valve.

Feature Summary

  • Bare shafted drill air-end (2-Year warranty)
  • Inlet control valve (Poppet valve assembly)
  • Fluid filter
  • Oil stop valve if required
  • Housing drive adapter SAE flywheel adapter only
  • Coupling assembly
  • Inlet filter (Filter only shipped loose)
  • High Temperature shut down switch
  • Discharge check valve
  • Separator element
  • Separator fluid return line w/sight glass
  • Minimum pressure check valve
  • Fluid thermal valve
  • Pressure relief valve
  • Running blowdown valve & shut down blowdown valve
  • Coalescing control line filter
  • Control System Loose regulators
  • Gauges

Typical Drill Kit Components:

Typical Compressor Assembly and Loose Parts

  1. Inlet control valve (Poppet or Butterfly valve assembly)
  2. Fluid filter
  3. Oil stop valve
  4. Housing drive adapter SAE FLYWHEEL ADAPTER OR NO ADAPTER.
  5. Coupling assembly
  6. High Temperature shut down switch
  7. Discharge check valve if required

Typical Receiver Tank Assembly

  1. Separator element
  2. Separator fluid return line w/sight glass
  3. Minimum pressure check valve
  4. Fluid thermal valve
  5. Pressure relief valve
  6. Running blowdown valve & shut down blowdown valve
  7. Coalescing control line filter

Typical Control System

  1. Regulator panel assembly (350 & 500 PSI)
  2. Loose regulators (Low pressure)

Typical Inlet Filter Assembly

  1. Inlet filter (Filter only shipped loose)
  • Receiver Tank
Features

Feature Summary

  • Bare shafted drill air-end (2-Year warranty)
  • Inlet control valve (Poppet valve assembly)
  • Fluid filter
  • Oil stop valve if required
  • Housing drive adapter SAE flywheel adapter only
  • Coupling assembly
  • Inlet filter (Filter only shipped loose)
  • High Temperature shut down switch
  • Discharge check valve
  • Separator element
  • Separator fluid return line w/sight glass
  • Minimum pressure check valve
  • Fluid thermal valve
  • Pressure relief valve
  • Running blowdown valve & shut down blowdown valve
  • Coalescing control line filter
  • Control System Loose regulators
  • Gauges
Modules & Specifications

Typical Drill Kit Components:

Typical Compressor Assembly and Loose Parts

  1. Inlet control valve (Poppet or Butterfly valve assembly)
  2. Fluid filter
  3. Oil stop valve
  4. Housing drive adapter SAE FLYWHEEL ADAPTER OR NO ADAPTER.
  5. Coupling assembly
  6. High Temperature shut down switch
  7. Discharge check valve if required

Typical Receiver Tank Assembly

  1. Separator element
  2. Separator fluid return line w/sight glass
  3. Minimum pressure check valve
  4. Fluid thermal valve
  5. Pressure relief valve
  6. Running blowdown valve & shut down blowdown valve
  7. Coalescing control line filter

Typical Control System

  1. Regulator panel assembly (350 & 500 PSI)
  2. Loose regulators (Low pressure)

Typical Inlet Filter Assembly

  1. Inlet filter (Filter only shipped loose)
Options
  • Receiver Tank

Let us help you find the right compressor for your needs