840-1000 High pressure Drill Compressor

The Sullair high pressure two stage rotary screw drill compressor delivers capacities and pressures from a range of 840 cfm at 350 psig or 23.8 m3/min at 24 bar to 100 cfm at 350 psig or 28.3 m3/min at 24 bar.

The Drill air-end is designed with a inlet control system and drive adapter to match up with drive choices. Multiple gear ratio’s with matched internal volume ratio’s dials in specific capacities and pressure for optimum performance.

POPULAR USAGE
Drilling.

MAIN BENEFIT
Bare shafted drill air end, 2 year warranty, Inlet filter, Fluid thermal valve.

Feature Summary

  • Bare shafted drill air-end (2-Year warranty)
  • Inlet control valve (Poppet valve assembly)
  • Fluid filter
  • Oil stop valve if required
  • Housing drive adapter SAE flywheel adapter only
  • Coupling assembly
  • Inlet filter (Filter only shipped loose)
  • High Temperature shut down switch
  • Discharge check valve
  • Separator element
  • Separator fluid return line w/sight glass
  • Minimum pressure check valve
  • Fluid thermal valve
  • Pressure relief valve
  • Running blowdown valve & shut down blowdown valve
  • Coalescing control line filter
  • Control System Loose regulators
  • Gauges

High Pressure Drill Kit 500 psig 840 to 1000 cfm

Typical Drill Kit Components:

Typical Compressor Assembly and Loose Parts

  1. Inlet control valve (Poppet or Butterfly valve assembly)
  2. Fluid filter
  3. Oil stop valve
  4. Housing drive adapter SAE FLYWHEEL ADAPTER OR NO ADAPTER.
  5. Coupling assembly
  6. High Temperature shut down switch
  7. Discharge check valve if required

Typical Receiver Tank Assembly

  1. Separator element
  2. Separator fluid return line w/sight glass
  3. Minimum pressure check valve
  4. Fluid thermal valve
  5. Pressure relief valve
  6. Running blowdown valve & shut down blowdown valve
  7. Coalescing control line filter

Typical Control System

  1. Regulator panel assembly (350 & 500 PSI)
  2. Loose regulators (Low pressure)

Typical Inlet Filter Assembly

  1. Inlet filter (Filter only shipped loose)
  • Receiver Tank
Features

Feature Summary

  • Bare shafted drill air-end (2-Year warranty)
  • Inlet control valve (Poppet valve assembly)
  • Fluid filter
  • Oil stop valve if required
  • Housing drive adapter SAE flywheel adapter only
  • Coupling assembly
  • Inlet filter (Filter only shipped loose)
  • High Temperature shut down switch
  • Discharge check valve
  • Separator element
  • Separator fluid return line w/sight glass
  • Minimum pressure check valve
  • Fluid thermal valve
  • Pressure relief valve
  • Running blowdown valve & shut down blowdown valve
  • Coalescing control line filter
  • Control System Loose regulators
  • Gauges
Modules & Specifications

High Pressure Drill Kit 500 psig 840 to 1000 cfm

Typical Drill Kit Components:

Typical Compressor Assembly and Loose Parts

  1. Inlet control valve (Poppet or Butterfly valve assembly)
  2. Fluid filter
  3. Oil stop valve
  4. Housing drive adapter SAE FLYWHEEL ADAPTER OR NO ADAPTER.
  5. Coupling assembly
  6. High Temperature shut down switch
  7. Discharge check valve if required

Typical Receiver Tank Assembly

  1. Separator element
  2. Separator fluid return line w/sight glass
  3. Minimum pressure check valve
  4. Fluid thermal valve
  5. Pressure relief valve
  6. Running blowdown valve & shut down blowdown valve
  7. Coalescing control line filter

Typical Control System

  1. Regulator panel assembly (350 & 500 PSI)
  2. Loose regulators (Low pressure)

Typical Inlet Filter Assembly

  1. Inlet filter (Filter only shipped loose)
Options
  • Receiver Tank

RELATED PRODUCTS